Rose & Bopla's Multitronic Build-A-Box, Aluminum Extrusion Enclosure System

Multitronic Build-A-Box®

*TECHNICAL DATA:*
•	Color–Customer painting and powdercoat is available.
•	Material–Bare Aluminum, AL Mg Si 0.5. See Aluminum specification in the Technical Information Chapter
•	Temperature Range: –40ºF to +212ºF
•	Unpainted Aluminum plate lids with self-tapping screws
•	Protection Classifications: IP 40 to EN 60529

The Multitronic Build-A-Box® line consists of a series of aluminum profiles that can be cut to any length required and capped with aluminum plate lids to make electronic enclosures. Eight profile designs are available in the series. Some profiles are hollow and some are split-half extrusions. All profiles are slotted internally for PCB or chassis mountings. Three of the Multitronic profiles incorporate an exterior heat sink design.
Profiles are stocked and sold unpainted in meter lengths. Plate lids are also stocked unpainted and include M3 x 8mm self tapping screws. Seven profile sets (marked with an * below) have external “T” slots for bracket wall-mounting. One profile set (10955170/10011113) can be wall-mounted with an optional “L-shaped” plate lid.
Rose+Bopla can paint Multitronic Build-A-Box® enclosures in any color specified.

Multitronic Build-A-Box^®
Part Number	Length Inches/mm	Width Inches/mm	Height Inches/mm	P.C. Card Slot Size
*10011109/ 10011109	39.37/1000 mm	4.13/105	1.97/50	2x100 mm
*10011109/ 10011110	39.37/1000 mm	4.13/105	3.15/80	3x100 mm
*10011110/ 10011110	39.37/1000 mm	4.13/105	4.33/110	4x100 mm
*10011109/ 10011111	39.37/1000 mm	4.13/105	2.20/56	1x100 mm
*10011111/ 10011110	39.37/1000 mm	4.13/105	3.39/86	2x100 mm
*10955170/ 10011113	39.37/1000 mm	8.19/208	2.13/54	2x57mm 1x85mm 1x204mm
*10011108 00	39.37/1000 mm	4.13/105	1.42/36	1x100 mm
*10011112 00	39.37/1000 mm	6.50/165	2.56/65	2x160 mm

Note: Dimensions are external. Metric is the primary dimension.
Inch conversions are for the user's convenience and are for reference only.
All extrusions sold in 1-meter lengths.

*These profiles feature external “T” slots for bracket wall-mounting.

We have attempted to present the information about our enclosures on this website in a straight-forward manner. We offer this information as accurate at the time of publication. Specifications are subject to change without notice. Rose+Bopla Enclosures is not responsible for inadvertent errors.

Aluminum Enclosures Index