| TECHNICAL
DATA: |
| • |
Color: Powdercoated Version–Upper section Light Gray similar to RAL 7035. Lower section Blue Gray similar to RAL 7001.
Unpainted Version–Bare Aluminum.
Special colors are available. See paint specifications in the Technical
Section. |
| • |
Material: Die-cast aluminum alloy, GD–AL Si 12
See Aluminum specification sheets in the Technical Section. |
| • |
Protection Classification: IP 40 |
| |
RoHS |
|
|
Alument housings are constructed in rugged diecast aluminum. Special advantages include: impact resistance, greater temperature resistance and unique “U” shaped lid/base design which simplifies electronic component installation and maintenance. Offered in three sizes, in either painted or unpainted versions. Standard painted color is light gray/blue gray. Four M4 screws assemble the housing from the bottom base. Optional front access lid screws can be used for wall mount applications. Rose+Bopla uses ALSi 12 copper free alloy with a copper content of .10 percent. The reduction in copper content increases the natural corrosion resistance properties of aluminum. |
| |
|
Download
Product Drawings for this Group  |
|
Diecast
Alument
Housings-Painted |
|
NON-STOCKING
PRODUCT–SUBJECT TO LARGE MINIMUM ORDER |
| Part Number |
Length
Inches/mm |
Width
Inches/mm |
Height
Inches/mm |
Weight
lbs. |
| AL 12 |
4.72/120 |
3.15/80 |
2.36/60 |
0.82 |
| AL 20 |
7.87/200 |
4.72/120 |
2.95/75 |
1.85 |
| AL 24 |
9.45/240 |
6.30/160 |
3.54/90 |
2.60 |
|
Download
Product Drawings for this Group |
|
Diecast
Alument
Housing-Unpainted |
|
NON-STOCKING
PRODUCT–SUBJECT TO LARGE MINIMUM ORDER |
| Part Number |
Length
Inches/mm |
Width
Inches/mm |
Height
Inches/mm |
Weight
lbs. |
| AL 12 U |
4.72/120 |
3.15/80 |
2.36/60 |
0.82 |
| AL 20 U |
7.87/200 |
4.72/120 |
2.95/75 |
1.85 |
| AL 24 U |
9.45/240 |
6.30/160 |
3.54/90 |
2.60 |
|
