HOME     |    ABOUT  US    |    CONTACT US    |    PRODUCTS    |    SERVICES    |     DOWNLOAD    |    TECHNICAL    |     NEWS    |    SITE MAP   
 

All sizes are available with an optional clear viewing lid. The clear polycarbonate lid version makes an ideal outdoor meter housing. All meters, LED readouts, and adjusting knobs can be mounted right under the lid with the optional aluminum display panel faceplate mounted on stud bolt posts. 
Optional internal hinges/lid screws can replace the standard lid screws and quickly turn these enclosures into wall-mounted indoor/outdoor cabinets with doors.


TECHNICAL DATA:
• Color: Gray similar to RAL 7032, or Transparent Lid.
• Material: Enclosure. Glass-fiber reinforced polyester. 
Transparent Lid, Polycarbonate
• Surface resistance: Enclosure, >1012 Ohm/VDE 0303
Transparent Lid, >1015 Ohm, DIN 53482.
• Impact Resistance: >7Nm, EN50014.
• Flammability: Enclosure, Self-extinguishing, UL 94 V0.
Transparent Lid, UL 94 V2
• Gasket Temperature Range:
Neoprene Foam Gasket –40°F to +212°F
Polyurethane Foam Gasket –40°F to +194°F 
Silicone Foam Gasket –76°F to +266°F
• Disruptive Strength: Enclosure, 18KV/mm / VDE 0303
Transparent Lid, >30KV/mm / VDE 0303
• Captive 3/4 Turn Lid Screws.
• Toxicity: Halogen Free.
• Protection Classifications:
NEMA Types: up to Nema 12 
IP 65, EN 60529 
• Approvals:
Maritime Register of Shipping #83.033.250.

 

BACK TO BASIC BOXES INTRO
 

Fiberglass Watertight Modular Flange System
 
Rose+Bopla’s Fiberglass Modular Flange System consists of three different enclosures that can be used as stand alone units or can be quickly bolted together with connecting tunnel flanges and wedges. This fast system of joining enclosures together
not only guarantees a watertight seal, but also offers greatly expanded internal component mounting space. The length and width dimensions are expandable by adding additional enclosures.
     These 3 expandable systems offer all the advantages of molded products: clean design, tight tolerances, consistent dimensions, strength, low cost and resistance to weather and industrial corrosion. They also offer what is not normally available with molded products: expansion capability. 
     All units are made from compression-molded fiberglass mats that are UV stabilized. This system offers strength, ruggedness and weather/corrosion resistance, unmatched by metal enclosures. The rugged compression molded plastic will not give off toxic halogenated gases when burned. This makes these units ideal for areas where strict fire codes limit the use of plastic cases in harsh manufacturing high fire hazard areas. These fiberglass modular enclosures are ideal for electrical junction boxes in caustic petro-chemical plants or electroplating plants. 
     Rose+Bopla’s fiberglass modular enclosures have also been used to house car wash controls and as outdoor post-mounted railroad signal control boxes. These units can be used alone as individual control or junction boxes, or can be snapped together quickly to create an expandable, wall-mounted, outdoor, electrical control center. These modular enclosures are ideal for outdoor use, as they are impervious to sun, rain, sleet, ice and acid rain. These boxes will outlast any metal unit outdoors. 
     Each enclosure includes compression molded lid and base, non-reinforced fiberglass (POCAN) 3/4 turn lid screws and a nonremovable polyurethane gasket. Flanges, connecting tunnels, hinges, mounting plates etc., are options and must be ordered separately. (Flange wedges are included with flanges). 
     Optional pre-threaded flanges have molded-in knockouts, which are easily removed with a screwdriver. This exposes the molded-in threads designed for Rose+Bopla’s fiberglass watertight cable grips. The grips are threaded and offer a watertight power cable entry/exit in seconds. The optional blank flange can be machined to fit any connector requirements, or unmachined, can be used to fill flange openings.
     Wall mounting holes are molded into each box. The lid must be removed to wall mount with this method. Optional external wall mounting brackets can be bolted onto the rear of the box. The lid does not have to be removed when using external wall-mount brackets.


Fiberglass Watertight Modular Flange System

1401: The 1401 model is the smallest of the units. This unit has two removable side flanges that allow rapid installation of electrical power cables with various Rose+Bopla flanges available.
270mm/10.63" L x 170mm/6.69" W x 136mm/5.35" H, Opaque Lid
270mm/10.63" L x 170mm/6.69" W x 151mm/5.94" H, Clear Lid

1402: This is the intermediate size of the Rose+Bopla Fiberglass Modular Flange Units. Two 1402 units make one 1403 unit. This unit is square and has four removable flanges, which allow for the rapid installation of electrical power cables with various Rose+Bopla flanges available.
270mm/10.63" L x 270mm/10.63" W x 136mm/5.35" H, Opaque Lid
270mm/10.63" L x 270mm/10.63" W x 150mm/5.91" H, Clear Lid



1403: The largest of the Rose+Bopla Fiberglass Modular Flange Units with six removable flanges, the 1403 offers unrestricted access on all sides when installing electrical power cables. This model is exactly twice the size of the 1402 model. It can be used as a standalone unit or connected to other units for expanded internal mounting space.
541mm/21.30" L x 270mm/10.63" W x 136mm/5.35" H, Opaque Lid
541mm/21.30" L x 270mm/10.63" W x 151mm/5.94" H, Clear Lid
   


Download Product Drawings for this Group  

Fiberglass Watertight Modular Flange System
Part Number Description Flange
Openings		 Length
Inches/mm		 Width
Inches/mm		 Height
Inches/mm		 Weight
lbs.		 CAD
14010000 00  Box without Flanges/Opaque Lid* 2 10.63/270 6.69/170 5.35/136 3.73  
14010001 00  Box without Flanges/Clear Lid* 2 10.63/270 6.69/170 5.94/151 3.73  
14020000 00  Box without Flanges/Opaque Lid* 4 10.63/270 10.63/270 5.35/136 4.19  
14020001 00  Box without Flanges/Clear Lid* 4 10.63/270 10.63/270 5.91/150 4.19  
14030000 00  Box without Flanges/Opaque Lid* 6 21.30/541 10.63/270 5.35/136 7.93  
14030001 00  Box without Flanges/Clear Lid* 6 21.30/54 10.63/270 5.94/151 7.93  

Note: Dimensions are external. Metric is the primary dimension. Inch conversions and weights are for the user’s convenience and are for reference only.
*Flanges and Flange wedges sold separately. See dimensional drawings. Accessories show on drawing pages.


14000020 00

14000021 00


14000022 00 14000023 00


14000030 00 14000025 00


Fiberglass Watertight Modular Flange   
Part Number Flange Description Cable Grip Holes
Qty Size
14000020 00 Blank Flange - -
14000021 00 Pre-Threaded Flange with wedges 11 M 32
14000022 00 Pre-Threaded Flange with wedges 14 M 25
14000023 00 Pre-Threaded Flange with wedges 4 M 32
    2 M 40
1 M50
14000030 00 Pre-Threaded Flange 17 M 20
14000025 00 Connecting Tunnel Flange - -


Fiberglass Modular Flange 1400 with Clear Lid Fiberglass Modular Flange 1400 Threaded Flange
We have attempted to present the information about our enclosures on this website in a straight-forward manner. We offer this information as accurate at the time of publication. Specifications are subject to change without notice. Rose+Bopla Enclosures is not responsible for inadvertent errors.  

©2006 Phoenix Mecano Inc., 7330 Executive Way, Frederick, MD 21704, 301-696-9800, rbinfo@pm-usa.com