Polycarbonate Modular Flange System 1700

Polycarbonate Modular Flange System 1700

Opaque lids are available in two depths, 20mm and 60mm, for the 1703, 1704, and 1705 models. 20mm lids are offered for the 1701 and 1702 version in both opaque and transparent. The new 1706 enclosure is available with 20mm lids in the standard material.

TECHNICAL DATA:
•	Material: Glass-filled Polycarbonate.
•	Color: Gray, similar to RAL 7032.
•	Impact resistance: 7 Nm, EN 50014 (except for pre-punched flanges).
•	Flammability: Enclosure, Self-extinguishing, UL 94 VO. Transparent lid, UL 94 V2
•	Surface resistance: >10¹⁵ Ohm, DIN 53481.
•	Gasket: Neoprene Foam.
•	Gasket Temperature Range: -40º F to +212º F.
•	Protection Classification: NEMA 12 IP 65 to EN 60529.
•	Toxicity: Low halogen content.
•	Weather Resistance: UV stabilized.
•	Disruptive Strength: Enclosure, >18 KV / mm to DIN 53481. Transparent lid, > 30 KV / mm to DIN 53481

Polycarbonate 1700 Modular Flange with Clear Lid

BACK TO BASIC BOXES INTRO

The Polycarbonate Modular Flange System is similar in design to our Fiberglass Modular Flange System in that these enclosures can be used as stand alone units or can be bolted together with connecting tunnel flanges and wedges. The Polycarbonate 1700 system features a greater range of sizes and is made of glass-filled Polycarbonate, a very economical material. One additional difference is that each Polycarbonate Modular Flange box is a complete enclosure unto itself, without the insertion of flanges.
     The Polycarbonate Modular Flange System covers a broad spectrum of applications because they can be combined in so many ways. This system is ideal in applications where add-on capability or routine entry into the enclosure for maintenance is required. Some major benefits of this enclosure system are: they are very economical; they can be used in combination with any other modular polycarbonate flange enclosures; and working with the flanges is easy. The most common applications for Polycarbonate Flange enclosures are in the automotive industry, in electrical installations, and in areas where frequent rewiring is necessary.
     The 1700 system consists of six different sizes of enclosures that can be used alone or connected together with tunnel adapters. Length and width dimensions are easily expandable by adding additional enclosures. Standard units, made of glass-filled polycarbonate, are UV stabilized to improve weather resistance and have a low halogen content which helps prevent the release of toxic halogenated gases when burned. The material brings strength, ruggedness, and weather/corrosion resistance to this very economical enclosure system. Our Polycarbonate Modular Flange enclosures have a NEMA 12 (IP 65) ingress protection rating and are mainly used indoors.
     Each unit includes a base and a lid with a polyurethane foam gasket. All lids come with captive, quick-release, Phillips-head lid screws, also made of glass-filled Polycarbonate material. Flanges, tunnel adapters, internal mounting plates, internal mounting clips, internal mounting boss inserts, internal hinges, DIN Rails, external brackets, wedges and stainless steel grounding strips are sold separately as accessories.
     Every enclosure comes with molded-in partitions in the sidewalls that can be knocked-out to accept the connecting tunnels or flanges. The simple interlocking clip and wedge design makes this process quick and easy. To remove the molded-in partitions in the enclosure sidewalls, simply score the perimeter of the partition with a razor knife then knock out the partition. To attach flanges and tunnel adapters, interlock clips at the bottom, then secure at the top with wedges. Some flanges have molded-in knockouts designed to accept Rose+Bopla cable grips.
     Depending on the application, the flange openings can be configured with either blind, threaded or connecting flanges.

1701: The 1701 model is the smallest of the units. This unit has two side flange openings.

170mm/6.69" L x 134mm/5.28" W x 130mm/5.12" H, 20mm Opaque Lid
170mm/6.69" L x 134mm/5.28" W x 130mm/5.12" H, 20mm Clear Lid

1702: This is an intermediate size in the Polycarbonate Modular Flange System. The unit is square and has four flange openings.

170mm/6.69" L x 170mm/6.69" W x 130mm/5.12" H, 20mm Opaque Lid
170mm/6.69" L x 170mm/6.69" W x 130mm/5.12" H, 20mm Clear Lid

1703:This is an intermediate size in the Polycarbonate Modular Flange System. This unit is
rectangular and has four flange openings.

269mm/10.59" L x 170mm/6.69" W x 130mm/5.12" H, 20mm Opaque Lid
269mm/10.59" L x 170mm/6.69" W x 130mm/5.12" H, 20mm Clear Lid

1704:This is an intermediate size in the Polycarbonate Modular Flange System. The unit is square and has four flange openings.

269mm/10.59" L x 269mm/10.59" W x 130mm/5.12" H, 20mm Opaque Lid
269mm/10.59" L x 269mm/10.59" W x 130mm/5.12" H, 20mm Clear Lid

1705: This is the largest of the Polycarbonate Modular Flange Units. This unit is rectangular and has six flange openings.

540mm/21.26" L x 269mm/10.59" W x 130mm/5.12" H, 20mm Opaque Lid
540mm/21.26" L x 269mm/10.59" W x 130mm/5.12" H, 20mm Clear Lid

No photo available

1706:This is an intermediate size in the Polycarbonate Modular Flange System. This unit is
rectangular and has four flange openings.

441mm/17.36" L x 269mm/10.59" W x 130mm/5.12" H, 20mm Opaque Lid
No clear lid version available in this size.

Download Product Drawings for this Group
Polycarbonate Modular Flange System 1700
Type	Part Number	Description	Flanges & Tunnels Accepted	Length Inches/mm	Width Inches/mm	Height Inches/mm	CAD
1701	17011000 00	Enclosure with standard opaque lid	2 Version 1	6.69/170	5.28/134	5.12/130
1701	17011010 00	Enclosure with standard clear lid	2 Version 1	6.69/170	5.28/134	5.12/130
1702	17011000 00	Enclosure with standard opaque lid	4 Version 1	6.69/170	6.69/170	5.12/130
1702	17021010 00	Enclosure with standard clear lid	4 Version 1	6.69/170	6.69/170	5.12/130
1703	17031000 00	Enclosure with standard opaque lid	4 Version 2	10.59/269	6.69/170	5.12/130
1703	17031010 00	Enclosure with standard clear lid	4 Version 2	10.59/269	6.69/170	5.12/130
1704	17041000 00	Enclosure with standard opaque lid	4 Version 1	10.59/269	10.59/269	5.12/130
1704	17041010 00	Enclosure with standard clear lid	4 Version 1	10.59/269	10.59/269	5.12/130
1705	17051000 00	Enclosure with standard opaque lid	6 Version 1	21.26/540	10.59/269	5.12/130
1705	17051010 00	Enclosure with standard clear lid	6 Version 1	21.26/540	10.59/269	5.12/130
1706	17061000 00	Enclosure with standard opaque lid	4 Version 1	17.36/441	10.59/269	5.12/130

Polycarbonate Modular Flange Accessories
Part Number	Description	Dimensions Inches/mm
17003100 00	Blind Flange (Version 1)	4.92/125 x 4.17/106
17003200 00	Blind Flange (Version 2)	8.82/224 x 4.17/106
17003400 00	Pre-Threaded Flange (Version 2) 19 x PG9/PG 13.5	8.27/210 x 3.62/91.95
17003500 00	Pre-Threaded Flange (Version 2) 16 x PG11/PG 16	8.27/210 x 3.62/91.95
17003300 00	Pre-Threaded Flange (Version 2) 10 x PG9/PG13.5 4 x PG11/PG16 2 x PG21/PG29	8.27/210 x 3.62/91.95
17003600 00	Tunnel Adapter	4.37/111 x 3.62/91.95
17003700 00	Tunnel Adapter	8.27/210 x 3.62/91.95
17004100 00	Wedges (set of 10)
17004200 00	Angle bracket (set of 4)

17003100 00

17003200 00

17003400 00

17003500 00

17003300 00

17003600 00 / 17003700 00

We have attempted to present the information about our enclosures on this website in a straight-forward manner. We offer this information as accurate at the time of publication. Specifications are subject to change without notice. Rose+Bopla Enclosures is not responsible for inadvertent errors.