Polycarbonate Watertight 03 Enclosures

Polycarbonate Watertight 03 Enclosures

TECHNICAL DATA:
•	Color: Light Gray similar to RAL 7035, with a high-gloss finish.
•	Material: Injection-molded Polycarbonate. See polycarbonate specification sheets in Technical Information Chapter.
•	Protection Classifications: Nema 4X, IP66, EN60529
•	Gasket Temperature Range: Neoprene Gasket –40º F to +212º F Silicone Gasket –76º F to +266º F RFI Gasket –40º F to +392º F
•	Surface Resistance: >10¹⁵ Ohm / VDE 0303.
•	Disruptive Strength: >30 KV / mm / VDE 0303.
•	Toxicity: Halogen Free.
•	Approvals: UL Listed File #E206630, UL 50, UL 508 CSA Approved Flammability: UL 94 V2 Special Material: UL Listed File #E206630, UL 50, UL 508 CSA Approved Flammability: UL 94 V5A
•	Options: (Minimum order may apply) Special Colors RFI Protection

Special Material: Special order. See above for approvals.

BACK TO BASIC BOXES INTRO

Rose+Bopla’s Polycarbonate Watertight 03 enclosure offers exceptional design possibilities in high quality plastic at low prices. A broad range of sizes covers a wide array of widths and depths. Ideal where high impact resistance or chemical corrosion must be addressed at a reasonable cost. Wall mounting holes are molded into each corner. These holes are outside the internal chamber to maintain the enclosures watertight integrity. The lid must be removed to utilize the wall mounting feature. This is a basic shoe box design made of injection-molded polycarbonate.
Rose+Bopla’s Polycarbonate Watertight 03 enclosures are designed for use in the electro-mechanical and the electronics industry. They are good for small instruments and junction boxes. Typical applications are relay module enclosures, geophysical sensoring equipment and temperature control monitors.
The Polycarbonate 03 box comes with a solid color lid and base, captive stainless steel lid screws, molded-in lid screw inserts in the base and a neoprene gasket. Metric press-in brass inserts for internal mounting bosses are also available.

Download Product Drawings for this Group
Polycarbonate Watertight 03 Enclosures
Part Number	Length Inches/mm	Width Inches/mm	Height Inches/mm	Weight lbs.	CAD
03050504 00	2.05/52	1.95/50	1.38/35	.08
03050704 30*	2.56/65	1.97/50	1.38/35	.11
03080806 30*	3.23/82	3.15/80	2.17/55	.30
03080809 30*	3.23/82	3.15/80	3.35/85	.38
03081206 30*	4.72/120	3.15/80	2.17/55	.48
03081209 30*	4.72/120	3.15/80	3.35/85	.49
03081606 30*	6.30/160	3.15/80	2.17/55	.51
03081609 00	6.30/160	3.15/80	3.35/85	.61
03082309 00	9.06/230	3.15/80	3.35/85	.74
03121206 30*	4.80/122	4.72/120	2.17/55	.52
03121209 30*	4.80/122	4.72/120	3.35/85	.65
03121211 00	4.82/122	4.72/120	4.13/105	.77
03121609 00	6.30/160	4.72/120	3.54/90	.87
03121614 00	6.30/160	4.72/120	5.51/140	1.32
03122008 30*	7.87/200	4.72/120	2.95/75	.87
03122008 00	7.87/200	4.72/120	2.95/75	.87
03122009 30*	7.87/200	4.72/120	3.54/90	1.03
03122410 00	9.45/240	4.72/120	3.94/100	1.04
03152008 00	7.87/200	5.90/150	2.95/75	1.15
03162409 00	9.45/240	6.30/160	3.54/90	1.43
03162412 00	9.45/240	6.30/160	4.72/120	1.75
03163610 00	14.17/360	6.30/160	3.94/100	2.17
03203615 00	14.17/360	7.87/200	5.87/149	3.41
03233009 00	11.81/300	9.06/230	3.35/85	2.01
03233011 00	11.81/300	9.06/230	4.33/110	2.54

Note: Dimensions are external. Metric is the primary dimension. Inch conversions and weights are for the user’s convenience and are for reference only. * “30” suffix indicates US made. Accessories shown on drawing page.