| TECHNICAL
DATA: |
| • |
Color: light gray, similar to RAL 7035. T 900, black. Special colors on request. Minimum order of 500+ pieces applies. |
| • |
Material: ABS plastic |
| • |
Ingress Protection: IP 40/DIN VDE 0470 |
| • |
Surface resistance:
>1014 Ohm to DIN 53482 |
| • |
Flammability: UL 94 HB/1.6 |
| • |
Disruptive strength: 17KV/mm to DIN 53481 |
|
|
|
|
|
|
|
▲
Futura T 898 F-RO (left), featuring an open rear wall , comes with an anodized aluminum rear panel, 1mm thick.
T 898 RO (right) features a split keypad area |
|
|
|
|
Futura
Sloped Housings Types
|
|
In the Futura product series you will find enclosures with a built-in wrist rest or with a tilting display area for optimal legibility. These flat control or keypad enclosures were designed especially for EDP workplaces, according to ergonomic
guidelines. In addition, there are designs in which the half-shells are assembled either as a console type or with the top shell inverted as a parallel design. Almost all these enclosures are suitable for this type of assembly. Most all these housings are suitable for assembly with a mechanical keypad, display, and flush-fitting membrane keypads. Some housings in this series can be supplied with either
a closed or open rear wall.
The aluminum panels, which are supplied as standard with the open versions, can easily be modified to your design. They provide sufficient space for different types of connectors or
sub-D sockets.
A number of mounting bosses are incorporated into the lids and bases to accept PC boards or mounting plates.
Futura housings come standard with a lid, base, assembly screws and 4 rubber feet. The RO versions come with an
aluminum front panel.
Membrane Keypad. |
|
Download
Product Drawing For This Group
 |
| Futura
Keyboard & Sloped Housings |
Model
Number |
Part
Number |
Length
Inches/mm |
Width
Inches/mm |
Height
Console
Inches/mm |
Height
Parallel
Inches/mm |
Weight
lbs. |
CAD |
|
Console/parallel
design |
| T 888 F |
47888200 |
7.68/195 |
10.83/275 |
0.96/24.5-F
1.89/48.0-R |
1.43/36.3 |
10.85 |
|
|
Console/parallel
design |
| T 889 F |
47889200
|
6.69/170 |
5.20/132 |
0.96/24.5-F
1.77/44.9-R |
1.37/34.7 |
.463 |
|
|
Console/parallel
design. Split key area |
| T
898 |
47898000
|
7.68/195 |
5.94/151 |
0.9925.2-F
1.89/48.0-R |
1.43/36.3 |
.611 |
|
|
Console/parallel
design. Continuous key area |
| T 898 F |
47898200
|
7.68/195 |
5.94/151 |
0.99/25.2-F
1.89/48.0-R |
1.43/36.3 |
.628 |
|
|
Console design.
Rear wall open, split key area |
| T 898 RO |
47898100
|
7.68/195 |
5.94/151 |
0.99/25.2-F
1.89/48.0-R |
N/A |
1.100 |
|
|
Console design.
Rear wall open, continuous key area |
| T 898 F
RO |
47898300
|
7.68/195 |
5.94/151 |
0.99/25.2-F
1.89/48.0-R |
N/A |
.606 |
|
|
Console/parallel
design |
| T 899 |
47899001 |
4.92/125 |
5.91/150 |
0.59/15.0-F
1.21/30.7-R |
0.90/23.0 |
.417 |
|
|
Console design |
| T 890 |
47890001
|
11.81/300 |
8.86/225 |
0.67/17.0-F
1.91/48.5-R |
N/A |
.970 |
|
|
Console design |
| T 893 |
47893001
|
19.69/500 |
8.86/225 |
0.67/17.0-F
1.91/49.0-R |
N/A |
3.380 |
|
|
Console design
with hinged display section |
| T 895 P |
47895101
|
19.00/480 |
13.11/333 |
3.51/89.3 |
N/A |
3.815 |
|
|
Console design
with hinged display section |
| T 900 |
47900000
|
11.02/280 |
9.64/245 |
1.30/33.0 |
N/A |
1.563 |
|
R=rear F=front
Note: Dimensions are
external. Metric is the primary dimension.
Inch conversions are for the user's convenience and are for
reference only.
Accessories shown on drawing page. |
|
