| TECHNICAL
DATA: |
| • |
Surface Finish: 240 grain polished finish |
| • |
Material: Stainless Steel 304(1.4301) or 316L(1.4404) as an option, 1.25mm thick.
|
| • |
Gasket Temperature Range: -4º F to +104º F |
| • |
Gaskets:
Silicone Foam Gasket
EMC (on request) |
| • |
Ingress Protection: IP 65 to EN 60529
|
|
Impact Resistance: >7Nm, EN 50014
|
|
Explosion Protection: AEx e II T6
AEx i II T6
|
|
Approvals:
Empty enclosure: PTB 00 ATEX 1101U
Terminal enclosure: PTB 00 ATEX 1052
UL File #E203312
|
|
|
|
Ex
Terminal Fittings for Stainless Steel Enclosures |
|
The Rose+Bopla Ex Stainless Steel cabinets are second to none in reliability and appearance. These enclosures house electrical and electronic applications in hazardous locations in medicine,
food preparation, pharmaceutics, wood and pulp mills, chemical environments, the entire petrochem industry and many others.
The material is a 301 (1.4301), with 316L (1.4404) as an option, 18 gauge grade stainless which is one of the most corrosive resistant materials used in popular enclosures. The seams are welded, ground smooth and then the entire cabinet is polished to a 240 grit finish. The silicone seal on the cover rests on a 15mm high lip on the bottom that is bent to an outward 10° angle so that nothing will accidently enter the enclosure when the door is opened. This design aids in water run off so that there will be no ice build up. There is no need for costly sloped roof accessories.
Off the shelf cabinets feature stainless steel hinges, a stainless steel locking system, foam-in silicone seal, equipment mounting rails inside, mounting holes on back, an external ground. EMC gasketing and custom sizes are available on request. These cabinets are certified to the ATEX guidelines and will work for increased and intrinsically safe design.
Rose+Bopla will machine the enclosure and install ATEX certified conduit hubs and/or cable glands, feed through terminals, and other ATEX components to make sure your system is compliant and marketable worldwide.
|
|
|
|
EX-IGS
Stainless
Steel Enclosures with Hines |
| Part
Number |
Length
Inches/mm |
Width
Inches/mm |
Height
Inches/mm |
Weight
lbs. |
| 34002209
00 |
7.87/200 |
9.84/250 |
3.82/97 |
5.18 |
| 34002215
00 |
7.87/200 |
9.84/250 |
6.18/157 |
5.78 |
| 34003209
00 |
13.78/350 |
9.84/250 |
3.82/97 |
7.69 |
| 34003316
00 |
11.81/300 |
11.81/300 |
6.57/167 |
9.61 |
| 34004416
00 |
14.96/380 |
14.96/380 |
6.57/167 |
13.40 |
| 34004421
00 |
14.96/380 |
14.96/380 |
8.54/217 |
15.03 |
| 34005316
00 |
19.68/500 |
11.81/300 |
6.57/167 |
14.00 |
| 34006316
00 |
23.62/600 |
11.81/300 |
6.57/167 |
19.29 |
| 34006421
00 |
23.62/600 |
14.96/380 |
8.54/217 |
25.17 |
Custom sizes available.
Note: Dimensions are external. Metric is the primary dimension. Inch conversions and weights are for the user’s convenience and are for reference only. *Change prefix to 35 for Exe Version, or 36 for Exi version. For example: 34002209 would become 35002209.
For information on Ex terminals.
For detailed information on our Ex product line, please request our Ex catalog. |
|
|
