HOME     |    ABOUT  US    |    CONTACT US    |    PRODUCTS    |    SERVICES    |    TECHNICAL    |     NEWS    |    SITE MAP

INSTRUMENTATION INTRO  |  COMBICARD 5000-7000 INTRO  |  MEMBRANE KEYPADS  |  DOWNLOAD PRODUCT DRAWINGS

CombiCard 5000-7000 System Components

Download Product Drawings For This Group 

Gray and Clear Front Lids

Model
 Number
Part
Number
Height
Inches/mm
Width
Inches/mm
Depth
Inches/mm
Weight
lbs.
CAD
   FD 5000 79002800 5.79/147 6.93/176 1.34/34 .690

   FD 6000 79002900 5.79/147 8.90/226 1.34/34 .728

   FD 7000 79003000 5.79/147 12.72/323 1.34/34 1.039

   FD 5000 G 79003100 5.79/147 6.93/176 1.34/34 .723

   FD 6000 G 79003200 5.79/147 8.90/226 1.34/34 .847

   FD 7000 G 79003300 5.79/147 12.72/323 1.34/34 1.100

G=Clear
Clear or light gray (similar to RAL 7035). Front Lid with integrated hinged quick release fastenings. There is a 1mm deep offset area for membrane keypads in the front area. 
Included: Front lid with seal; two mounted locks; one blind plug to close lock opening on the opening side; one catch to close lock opening and one-time definition of the hinge side on the front lid.
 

Download Product Drawings For This Group 

Closed Front Frames

Model
 Number
Part
Number
Height
Inches/mm
Width
Inches/mm
Depth
Inches/mm
Weight
lbs.
CAD
FR 5000 79003700 5.79/147 6.93/176 1.34/34 .743
FR 6000 79003800 5.79/147 8.90/226 1.34/34 .880
FR 7000 79003900 5.79/147 12.72/323 1.34/34 1.158
Closed front frame designed to hold membrane keypads. Mounting bosses are molded on the inside area for fitting PC boards, mounting plates or keyboard support plates. The front frame can be attached with snap-on covers on the base or rear, as well as with supplied screws needed to comply with VDE regulations. If required, upgrading to a hinged quick-release fastening is possible at a later date using accessory SV 5670. 
Included: Front frame with seal, two snap-on covers, four fixing screws.
 

Download Product Drawings For This Group 

Closed Front Frames

Model
 Number
Part
Number
Height
Inches/mm
Width
Inches/mm
Depth
Inches/mm
Weight
lbs.
CAD
FO 5000 79003400 5.79/147 6.93/176 1.34/34 .633
FO 6000 79003500 5.79/147 8.90/226 1.34/34 .710
FO 7000 79003600 5.79/147 12.72/323 1.34/34 .867
Open front frame design, for fitting front panels FP...Al with integrated pre-formed molded seal. Customer-specific panels with comparable quality and stability guarantee an IP 66 rating. The front frame can be attached by using the snap-on cover on the base or rear, as well as with supplied screws needed to comply with VDE regulations. If required, upgrading to a hinged quick-release 
fastening is possible at a later date using accessory SV 5670.
Included: Front frame with seal, two snap-on covers, four fixing screws, 10 front panel mounting screws.

We have attempted to present the information about our enclosures on this website in a straight-forward manner. We offer this information as accurate at the time of publication. Specifications are subject to change without notice. Bopla Enclosures is not responsible for inadvertent errors.

2013 Phoenix Mecano Inc., 7330 Executive Way, Frederick, MD 21704, 301-696-9800, E-Mail: RBinfo@pm-usa.com
For Technical Assistance E-Mail Technicalinfo@pm-usa.com or Call 301-696-2126, 8:30 am to 5:00 pm EST
For Sales or Customer Service, Please Call 301-696-9800