|
| TECHNICAL
DATA: |
|
• |
Color: agate gray, similar to RAL 7038. Special colors available on request. Minimum quantity required. |
| • |
Material–enclosure body and endcaps, ABS plastic
Infrared-permissive endcap, Polycarbonate |
| • |
Gasket: Neoprene |
| • |
Ingress protection: IP 40 to DIN VDE 0470
IP 65 with gaskets
NEMA 12 |
| • |
Surface resistance: 1014 Ohm to DIN 53482 |
| • |
Flammability: UL 94 HB/1.6 |
| • |
Impact resistance: 17KV/mm to DIN 53481 |
| • |
Temperature resistance: -4ºF to 158ºF |
|
|
The ARTEB 225 is an attractive handheld enclosure made of robust ABS plastic. It features a continuous membrane keypad area on the lid and base, and has 2 endcaps, top and bottom. The back side of the 225 could also be used to mount a membrane keypad. An integrated slot is provided at each end of the ART 225 that allows the mounting of small panels or boards
perpendicular to the base. Arteb caps are used to finish the enclosure at the top and bottom and are available in black and
6 different colors to give the enclosure an individualized appearance. Caps can be removed by hand or by using a screwdriver. For infrared remote control applications, black infrared-permissive (IR) caps are an option.
All caps are considered accessories and must be ordered separately. Other accessories include snap lock, clip stand, gasket set, battery holder, and table drawer.
|
F=continuous membrane area
1 Can be combined with the universal docking station.
Note: Dimensions are external. Metric is the primary dimension. Inch conversions are for the user’s convenience and are for reference only.
Accessories shown on drawing page. |
|
