| TECHNICAL
DATA: |
|
• |
Color: agate gray, similar to RAL 7038. Special colors available on request. Minimum quantity required. |
| • |
Material–enclosure body and endcaps, ABS plastic
Infrared-permissive endcap, Polycarbonate |
| • |
Gasket: Neoprene |
| • |
Ingress protection: IP 40 to DIN VDE 0470
IP 65 with gaskets on ART 865 DIS and ART 865 F, NEMA 12 |
| • |
Surface resistance: 1014 Ohm to DIN 53482 |
| • |
Flammability: UL 94 HB/1.6 |
| • |
Impact resistance: 17KV/mm to DIN 53481 |
| • |
Temperature resistance: -58ºF to +194ºF |
|
The ergonomically shaped ARTEB 865, made of robust ABS plastic, is ideal for demanding applications. The series consists of 3 display models (DIS) and 3 models (F) designed for continuous membrane keypads. The basic F and DIS models can be
gasketed to achieve an IP 65 rating. Internal battery compartments and dividing walls are sold separately for these models. Four models in the series are available with integrated battery
compartments, which can be accessed from the outside of the enclosure. Part numbers are tagged “w/BE30” or “w/BE60”. Ingress protection for these models is IP 40. All models require caps to finish the enclosure at the top and bottom. Caps come in 6 different colors and Black infrared-permissive (IR) to give the enclosure a unique appearance. All ARTEB 865 enclosures
feature an integrated slot at each end for mounting small panels or boards perpendicular to the base. The DIS models are designed for displays 128 x 64 dots or 4 x 20 characters. Mounting bosses are located in the lid and base to accommodate standard displays. Clear display windows are offered that are scratch-resistant on one side and can be printed on the opposite side.
Accessories include: end caps; battery holders, compartments, and dividing walls; snap locks; clip stands; gasket sets, and display windows. Accessories must be ordered separately. |
|
F=continuous membrane area,
DIS=display opening, BE=battery compartment
1 Can be combined with the universal docking station.
Note: Dimensions are external. Metric is the primary dimension. Inch conversions are for the user’s convenience and are for reference only.
Accessories shown on drawing page. |
|
