| TECHNICAL
DATA: |
|
• |
Color: agate gray, similar to RAL 7038. Special colors on request. Minimum quantity required. |
| • |
Material–ABS |
| • |
Gasket: Neoprene |
| • |
Ingress protection: IP 40 to DIN VDE 0470
IP 65 with gaskets, except ART 115 and ART... BE applications. |
| • |
Surface resistance: 1014 Ohm to DIN 53482. |
| • |
Flammability: UL 94 HB/1.6. |
| • |
Impact resistance: 17KV/mm to DIN 53481. |
| • |
Temperature resistance: -58ºF to +158ºF. |
End caps are available in 6 colors
plus black. Clockwise from top left: black (infrared-permissive), sky blue, flame red, agate gray, sulphur yellow, light green, dusty gray. |
|
ARTEB handheld enclosures, made of durable ABS plastic, offer an extensive array of design features that make them the perfect package for portable electronic equipment. This new handheld enclosure combines ergonomic design, flexibility, optional IP 65 protection and high functionality, all to the user’s advantage. The unified design concept, which ranges over 6 sizes in combination with end caps in black and 6 colors, gives any electronic device a
distinctive appearance. ARTEB meets the challenge with many possible combinations.
In the standard configuration they are classified with an ingress protection rating of IP 40. However, gasket sets are available that increase the rating to IP 65, with the exception of ART 115. On ARTEB models with 2
end caps, it is possible to mount small boards or mounting plates vertical to the enclosure base by utilizing the integrated slot between the base and lid. All sizes in the ARTEB series are membrane keypad ready, and ART
335, ART 555, and ART 865 are offered with a display opening. Plastic display screens with scratch resistant coating are
available for all display (DIS) versions. Battery compartments are made for larger sizes (ART 555, ART 655, ART 865). Battery compartments come with integrated front panels to prevent
contact with other built-in components. Battery compartment dividing walls are an option for ART 335, ART 555, ART 655 and ART 865. Two types of catch locks are sold as accessories. One catch lock allows the enclosure to be opened by hand, instead of with a screwdriver. The other type prevents the opening of the enclosure. This gives the flexibility to set the cap functions
differently from top to bottom depending on your design.
ARTEB enclosures are supplied as a lid and a base. End caps, gaskets, battery compartments, dividing walls, display screens and snap locks must be ordered separately.
|
F=continuous membrane area, DIS=display opening
1 Can be combined with the universal docking station.
Note: Dimensions are external. Metric is the primary dimension. Inch conversions are for the user’s convenience and are for reference only.
Accessories shown on drawing page. |
|
