| TECHNICAL
DATA: |
| • |
Material:
Inner Enclosure Body-Polyamide
Side Covers–Black PVC extrusion
Front Panel–Bright anodized Aluminum, 3mm thick.
Rear Panel–Black laminated board, 3mm, plastic-coated
End Caps–Yellow Polyamide |
| • |
Gasket: Neoprene |
| • |
Color:
End Caps–yellow, similar to RAL 1021
Body–black, similar to RAL 9005
Rear Panel–black, similar to RAL 9005 |
| • |
Ingress Protection:
IP 65 to EN 60529, NEMA 12 |
| • |
Impact Resistance: >7Nm, EN 50014 |
| • |
Temperature Resistance: -4ºF up to +158ºF |
|
|
Providing an interface between man and machine, the 2911, 2912 and 2913 machine control enclosures offer versatile design possibilities for handheld control units. These enclosures are designed for use in machine and plant engineering, to protect sophisticated electronic equipment in control engineering, and even for display units, just to name a few.
These control unit enclosures offer ideal conditions for mounting small control devices and control panels. Because of the inner and outer enclosure profile design, adequate protection is ensured, even in rough industrial environments. A screened (EMI/RFI) inner enclosure, made of aluminum, is also available if sensitive electronic components need to be protected.
The outer enclosure profile is manufactured from PVC extrusions, making variable lengths possible. The yellow end caps are injection molded in Polyamide. The black plastic side casings are ridged for improved handling and are adjustable to allow for a wide or narrow front panel width. Housings are gasketed for dust and splash water protection and the aluminum front panels are removable for machining.
Standard configuration for these Control Unit housings
consists of an inner enclosure profile with end caps, an outer enclosure profile with end caps, front panel, rear panel, wall-mount fitting, and machined hole for M25 cable grip. Accessories include: wall-mount bracket, aluminum front panel, M25 power cable grip, M12, M16, and M20 can be ordered with M25 adapter.
|
|
