| TECHNICAL
DATA: |
| • |
Color: Light gray, similar to RAL 7035; special colors and minimum order quantities on request |
| • |
Material–Polyamide, 30%
glassbead-reinforced |
| • |
Ingress Protection: IP 65 to DIN VDE 0470, NEMA 12 |
| • |
Flammability: UL 94 HB/1.6 |
| • |
Membrane keypad ready |
|
The Tastomat was developed specifically for use as factory floor control units in tough operating conditions. This enclosure offers ample space for many standard applications. Tastomat is gasketed to provide an ingress protection rating of IP 65 and is made of glassbead-reinforced polyamide. These two factors offer optimal protection for your electronic components even under the most demanding circumstances.
The wrap around 5mm recessed front panel area gives a high degree of protection for fitted operating elements against unintentional operation or destruction. Molded-in ribs in the bottom half of the enclosure are designed for easier handling.
Drill holes in the base can be used for wall-mount applications. Six M4 x 62 assembly screws secure the housing together from the rear. Four internal mounting bosses with M3 threaded inserts accept screws for mounting plates.
|
|
Download
Product Drawings For This Group
 |
| Tastomat |
Model
Number |
Part
Number |
Length
Inches/mm |
Width
Inches/mm |
Height
Inches/mm |
Weight
lbs. |
CAD |
| TAS
100 |
08100000 00 |
9.88/251 |
3.58/91 |
1.81/46 |
.752 |

|
| TAS
200 |
08200000 00 |
9.88/251 |
3.58/91 |
3.15/80 |
1.039 |

|
|
|
|