Botego 520 Components

BOTEGO, BO 520..., without air vents








BOTEGO, BO 520...L, with air vents

BOTEGO 520 Components

Download Product Drawings For This Group
BOTEGO Enclosures, BO 520..(L)
Model Number	Part Number	Width Inches/mm	Height Inches/mm	Depth Inches/mm	Weight lbs.	CAD
BO 52006	68520060	9.48/240.7	1.97/49.96	7.75/196.9	0.889
BO 52006 L	68520061	9.48/240.7	1.97/49.96	7.75/196.9	0.827
BO 52009	68520090	9.48/240.7	2.57/65.20	7.75/196.9	.0816
BO 52009 L	68520091	9.48/240.7	2.57/65.20	7.75/196.9	.0911
BO 52012	68520120	9.48/240.7	2.57/65.20	7.75/196.9	1.133
BO 52012 L	68520121	9.48/240.7	2.57/65.20	7.75/196.9	1.080

L=with molded-in air vents in lid and base
The Botego enclosure, BO520... is offered in 3 different enclosure heights. The usable basic enclosure height can be increased by using extension sets, BO AB-02009(L), according to the chart below.
Front panels, BO FP..., must be chosen based on the selected enclosure width.
Including: Two half-shells.
Accessories shown on drawing page.
Membrane Keypad.

Download Product Drawings For This Group
BO520...(L) Selection Table For Front Panels and Extension Sets
Part Number	Usable Enclosure Height Inches/mm	TE	Number of BO AB 02009(L)	Front Panels To Be Used
BO 52006 (L)	1.23/ 31.28	6	-	BO FP 50006
BO 52009 (L)	1.83/ 46.52	9	-	BO FP 52009
BO 52012 (L)	2.43/ 61.76	12	-	BO FP 50012
BO 52006 (L)	3.03/ 77.00	15	1	BO FP 50015
BO 52009 (L)	3.63/ 92.24	18	1	BO FP 50018
BO 52012 (L)	4.23/107.48	21	1	BO FP 50021
BO 52006 (L)	4.83/ 22.72	24	2	BO FP 50024
BO 52009 (L)	5.43/137.96	27	2	BO FP 50027
BO 52012 (L)	6.03/153.20	30	2	BO FP 50030
BO 52006 (L)	6.63/168.44	33	3	BO FP 50033
BO 52009 (L)	7.23/183.68	36	3	BO FP 50036
BO 52012 (L)	7.83/198.32	39	3	BO FP 50039
BO 52006 (L)	8.43/214.16	42	4	BO FP 50042
BO 52009 (L)	9.03/229.40	45	4	BO FP 50045
BO 52012 (L)	9.63/244.64	48	4	BO FP 50048

BOTEGO 520..L front panels

BOTEGO 520..L with extension set.

Charts for Extension sets and Front panels shown below.

Download Product Drawings For This Group
BOTEGO Plug-In Front Panels BO FP... For BO 520...(L)
Model Number	Part Number	TE	Height Inches/mm	Width Inches/mm	Weight lbs.
BO FP 50006	68711506	6	1.67/42.48	8.96/227.65	.112
BO FP 50009	68711509	9	2.27/57.75	8.96/227.65	.152
BO FP 50012	68711512	12	2.87/72.96	8.96/227.65	.194
BO FP 50015	68711515	15	3.47/88.20	8.96/227.65	.234
BO FP 50018	68711518	18	4.07/103.44	8.96/227.65	.276
BO FP 50021	68711521	21	4.67/118.68	8.96/227.65	.315
BO FP 50024	68711524	24	5.27/133.92	8.96/227.65	.355
BO FP 50027	68711527	27	5.87/149.16	8.96/227.65	.397
BO FP 50030	68711530	30	6.47/164.40	8.96/227.65	.437
BO FP 50033	68711533	33	7.07/179.64	8.96/227.65	.476
BO FP 50036	68711536	36	7.67/194.88	8.96/227.65	.518
BO FP 50039	68711539	39	8.27/210.12	8.96/227.65	.558
BO FP 50042	68711542	42	8.87/225.35	8.96/227.65	.644
BO FP 50045	68711545	45	9.47/240.60	8.96/227.65	.684
BO FP 50048	68711548	48	10.07/255.84	8.96/227.65	.679

FP=Anodized aluminum, 2.0mm thick
Front panels must be chosen to match the selected extension sets. Please refer to selection table above.
Membrane Keypad.

Download Product Drawings For This Group
BOTEGO Extension Sets BO AB... For BO 520..(L)
Model Number	Part Number	Color	Weight	CAD
BO AB 02009-7035	68200910	Light gray, similar to RAL 7035	0.216
BO AB 02009 L-7035	68200911	Light gray, similar to RAL 7035	0.196

L = with molded-in air vents in lid and base
Extension Sets make it possible to extend the BOTEGO enclosure between the half shells.
Including: Two extension units.
Other colors available, call for details. Minimum quantity order applies.
Membrane Keypad.

Note: Dimensions are external. Metric is the primary dimension. Inch conversions are for the user’s convenience and are for reference only.