| TECHNICAL
DATA: |
| |
Color: Front Lid, light gray, similar to RAL 7035. Special colors available on request, minimum quantities apply. |
| |
Material: ABS front lid; base and flush-mounted frame, galvanized sheet steel, 0.8 mm. |
| |
Ingress Protection: Front lid, up to IP 54, depending on the size and characteristics of the installation area. |
| |
Surface Resistance: ABS,
>1014 Ohm to DIN 53482. |
| |
Flammability: Lid, UL 94 HB/1.6. |
| |
Disruptive Strength: 17KV/mm to DIN 53481. |
| |
Note: Dimensions are external. Metric is the primary dimension. Inch conversions are for the users convenience and are for reference only. |
|
This flat ABS operating front was designed for use as a machine operating panel or control panel mounted enclosure. The wraparound seal provides IP 54 protection in respect of the installation area. The front surface was lowered especially for the protected fitting of membrane keyboards or other front elements. The installed electronic components can be protected by means of a sheet metal hood mounted on the back. The design and construction of these special hoods makes low-cost processing possible, also for small series.
A special flush-mounted frame (CR) is available for flush mounted assembly. Good EMC screening is achieved by the later application of metal coating on the front lid. Select CombiBac bases can also be used with RCP/RCPM...F enclosures for control panel applications and EMC protection.
|
|
|
