CombiCard 5000-7000_FD5000

CombiCard 5000-7000 System Components

Download Product Drawings For This Group
Gray and Clear Front Lids
Model Number	Part Number	Height Inches/mm	Width Inches/mm	Depth Inches/mm	Weight lbs.	CAD
FD 5000	79002800	5.79/147	6.93/176	1.34/34	.690
FD 6000	79002900	5.79/147	8.90/226	1.34/34	.728
FD 7000	79003000	5.79/147	12.72/323	1.34/34	1.039
FD 5000 G	79003100	5.79/147	6.93/176	1.34/34	.723
FD 6000 G	79003200	5.79/147	8.90/226	1.34/34	.847
FD 7000 G	79003300	5.79/147	12.72/323	1.34/34	1.100

G=Clear
Clear or light gray (similar to RAL 7035). Front Lid with integrated hinged quick release fastenings. There is a 1mm deep offset area for membrane keypads in the front area.
Including: Front lid with seal; two mounted locks; one blind plug to close lock opening on the opening side; one catch to close lock opening and one-time definition of the hinge side on the front lid.
Accessories shown on drawing page.

Download Product Drawings For This Group
Closed Front Frames
Model Number	Part Number	Height Inches/mm	Width Inches/mm	Depth Inches/mm	Weight lbs.	CAD
FR 5000	79003700	5.79/147	6.93/176	1.34/34	.743
FR 6000	79003800	5.79/147	8.90/226	1.34/34	.880
FR 7000	79003900	5.79/147	12.72/323	1.34/34	1.158

Closed front frame designed to hold membrane keypads. Mounting bosses are molded on the inside area for fitting PC boards, mounting plates or keyboard support plates. The front frame can be attached with snap-on covers on the base or rear, as well as with supplied screws needed to comply with VDE regulations. If required, upgrading to a hinged quick-release fastening is possible at a later date using accessory SV 5670.
Including: Front frame with seal, two snap-on covers, four fixing screws.
Accessories shown on drawing page.

Download Product Drawings For This Group
Closed Front Frames
Model Number	Part Number	Height Inches/mm	Width Inches/mm	Depth Inches/mm	Weight lbs.	CAD
FO 5000	79003400	5.79/147	6.93/176	1.34/34	.633
FO 6000	79003500	5.79/147	8.90/226	1.34/34	.710
FO 7000	79003600	5.79/147	12.72/323	1.34/34	.867

Open front frame design, for fitting front panels FP...Al with integrated pre-formed molded seal. Customer-specific panels with comparable quality and stability guarantee an IP 66 rating. The front frame can be attached by using the snap-on cover on the base or rear, as well as with supplied screws needed to comply with VDE regulations. If required, upgrading to a hinged quick-release
fastening is possible at a later date using accessory SV 5670.
Including: Front frame with seal, two snap-on covers, four fixing screws, 10 front panel mounting screws. Accessories shown on drawing page.

We have attempted to present the information about our enclosures on this website in a straight-forward manner. We offer this information as accurate at the time of publication. Specifications are subject to change without notice. Rose+Bopla Enclosures is not responsible for inadvertent errors.