HOME     |    ABOUT  US    |    CONTACT US    |    PRODUCTS    |    SERVICES    |     DOWNLOAD    |    TECHNICAL    |     NEWS    |    SITE MAP
 
 
 
BACK TO COMBSET INTRO  



CombiSet System Components

Download Product Drawings For This Group  

Enclosure with Door for Control Panel Mounting
Model
 Number		 Part
Number		 Width
Inches/mm		 Depth
Inches/mm		 Height
Inches/mm		 Weight
lbs.		 CAD
CC 500 NGTK 19050301 2.83/72 9.96/253 5.67/144 1.438

 
A lead wire for sealing purposes can be introduced through the opening parallel to the knob. 
IP 65 protection rating (DIN VDE 0470). Ingress protection applies to enclosure, not control panel wall.
Including: Base with molded-on installation frame, rear, upper and lower guide grids, front door, clear, hinged with knob, retaining clasps, tapping strips, screws.
Accessories shown on drawing page.







CombiSet System Accessories
 

Download Product Drawings For This Group  

 
Model
Number		 Part
Number

Description

 Weight
lbs.		 CAD
CC 500 WR 39001000 Wall Frame .110

CC 500 TS 39005000 Rail Snap Foot for top hat rail DIN EN 50022-35. This rail snap foot is inserted into the grooves in the rear lid. .507  
CC 500 MS 39004000 Mounting Kit for DIN EN 60603-2 plug-in connector (previously DIN 41612). This mounting kit can be used to attach DIN EN 60603-2 plug-in connectors to the guide grids. .031  
SHLO-302 21008310 Cylinder Lock Catch .037

 
KF 1230 39302000 Card Guide, 10 pieces .090  
KS 1230 39301000 Card Securing Device, 10 pieces .007  
We have attempted to present the information about our enclosures on this website in a straight-forward manner. We offer this information as accurate at the time of publication. Specifications are subject to change without notice. Rose+Bopla Enclosures is not responsible for inadvertent errors.  

©2008 Phoenix Mecano Inc., 7330 Executive Way, Frederick, MD 21704, 301-696-9800, rbinfo@pm-usa.com