HOME     |    ABOUT  US    |    CONTACT US    |    PRODUCTS    |    SERVICES    |     DOWNLOAD    |    TECHNICAL    |     NEWS    |    SITE MAP
 
 
 
BACK TO RCP/RCPM INTRO  



Cylinder Catch/Hand Knob: The cylinder catch or hand knob can be retro-fitted later in the mounting opening in the snap lock. If a blind plug or cylinder catch are fitted, they can easily be released from the rear and pressed out.

Wall Brackets: For 4-point wall mounting. Attachment is on the rear of the enclosure from the outside. Light gray similar to RAL 7035. Matches all RCP/RCPM enclosures. 
Material: ABS. 

Mounting Plates: These 2mm laminated paper mounting plates are fitted with drill holes for mounting in the enclosure and terminal compartment.

Front Panels: The aluminum front panels are anodized, 1mm or 1.5mm. Note: When used with RCP/RCPM enclosures, front panels up to 3mm thick can be installed.

CombiBac Bases are made of galvanized sheet steel. Can be used with RCP/RCPM...F versions for installation in control panels and flush-mounted
installations.


 
RCP/RCPM Housings Accessories

Accessories
Model
 Number		 Part
Number		 Description CAD
 WL 1230 RCP 41000300 Wall brackets, pack of 2

 
 HK 1230 RCP 41002501 Hand Knob  
 SHLO-302 21008310 Cylinder Catch (0.37 lbs.)  
 Mounting Plates
 MP 1300 RCP 41000350 Mounting plate for RCP/RCPM 130/1300 series, laminated paper, 2mm  
 MP 1600 RCP 41000400 Mounting plate for RCP/RCPM 160/1600 series, laminated paper, 2mm  
MP 1700 RCP 41000400 Mounting plate for RCP/RCPM 170/1700 series, laminated paper, 2mm  
MP 2000 RCP 41000500 Mounting plate for RCP/RCPM 200/2000 series, laminated paper, 2 mm  
 MP 2500 RCP 41000600 Mounting plate for RCP/RCPM 250/2500 series, laminated paper, 2mm  
MP 3100 RCP 41000700 Mounting plate for RCP/RCPM 310/3100 series, laminated paper, 2mm  
MP 3500 RCP 41000700 00 Mounting plate for RCP/RCPM 350/3500 series, laminated paper, 2mm  
 MP 4000 RCP 41000800 00 Mounting pate for RCP/RCPM 400/4000 series, laminated paper, 2mm  
 Front Panels
 FP 1300 RC 27000100 Front Panel for RCP/RCPM 130/1300 series, anodized aluminum, 1mm  
 FP 1600 RC 27000300 Front Panel for RCP/RCPM 160/1600 series, anodized aluminum, 1mm  
FP 1700 RC 27000300 Front Panel for RCP/RCPM 170/1700 series, anodized aluminum, 1mm  
 FP 2000 RC 27000500 Front Panel for RCP/RCPM 200/2000 series, anodized aluminum, 1mm  
 FP 2500 RC 27000700 Front Panel for RCP/RCPM 250/2500 series, anodized aluminum, 1mm  
 FP 3100 RC 27000900 Front Panel for RCP/RCPM 310/3100 series, anodized aluminum, 1mm  
FP 3500 RC 27000900 Front Panel for RCP/RCPM 350/3500 series, anodized aluminum, 1mm  
 FP 4000 RC 27120000 Front Panel for RCP/RCPM 400/4000 series, anodized aluminum, 1mm  
 CombiBac Bases
 CB 1304 69130400 CombiBac base for RCP/RCPM 130F (.507 lbs.)

 CB 1604 69160400 CombiBac base for RCP/RCPM 160F, RCP/RCPM 170F (.494 lbs.)

 CB 1607 69160700 CombiBac base for RCP/RCPM 170F (.688 lbs.)

 
 CB 2004 69200400 CombiBac base for RCP/RCPM 200F (.668 lbs.)

 CB 2504 69250400 CombiBac base for RCP/RCPM 250F (.997 lbs.)

 CB 3104 69310400 CombiBac base for RCP/RCPM 310F, RCP/RCPM 350F (1.394 lbs.)

 CB 3107 69310700 CombiBac base for RCP/RCPM 310F, RCP/RCPM 350F (1.717 lbs.)  
 CB 3110 69311000 CombiBac base for RCP/RCPM 350F (2.324 lbs.)  
 CB 4004 69400400 CombiBac base for RCP/RCPM 400F (2.024 lbs.)

 CB 4007 69400700 CombiBac base for RCP/RCPM 400F (2.514 lbs.)  
 CB 4010 69401000 CombiBac base for RCP/RCPM 400F (2.437 lbs.)  

 
 
We have attempted to present the information about our enclosures on this website in a straight-forward manner. We offer this information as accurate at the time of publication. Specifications are subject to change without notice. Rose+Bopla Enclosures is not responsible for inadvertent errors.  

©2008 Phoenix Mecano Inc., 7330 Executive Way, Frederick, MD 21704, 301-696-9800, rbinfo@pm-usa.com