Ultramas_UM3...09

Ultramas, UM3...09, without air vents

Ultramas UM 3...09

Download Product Drawings For This Group
Ultramas Enclosures, UM 3...09
Model Number	Part Number	Width Inches/mm	Height Inches/mm	Depth Inches/mm	Weight lbs.	CAD
UM 32009	55320000	6.20/157.5	2.45/62.2	7.83/198.9	.946
UM 32009 L	55320010	6.20/157.5	2.45/62.2	7.83/198.9	.922
UM 32609	55326000	6.20/157.5	2.45/62.2	10.19/258.9	1.213
UM 32609 L	55326010	6.20/157.5	2.45/62.2	10.19/258.9	1.186

L=with molded-in air vents in lid and base

The usable basic enclosure height of 46.5mm, in horizontal use, can be increased by using
extension sets AB.... Front panels must be chosen to match the selected enclosure width.
Including: Two half-shells, eight covers, four rubber feet, and four M3 screws.
Accessories shown on drawing page.

Ultramas, UM3...09, with air vents in lid and base

Download Product Drawings For This Group
UM 3...09 Selection Table For Front Panels and Extension Sets
Usable Enclosure Height	Number of Extension Sets		Front Panels To Be Used
Usable Enclosure Height	AS 02...03	AS 02...09(L)	Front Panels To Be Used
46.5 mm	-	-	FP(K) 30009
61.7 mm	1	-	FP(K) 30012
92.2 mm	-	1	FP(K) 30018
107.5 mm	1	1	FP(K) 30021
138.0 mm	-	2	FP(K) 30027
153.2 mm	1	2	FP(K) 30030
183.7 mm	-	3	FP(K) 30036

Ultramas Accessories

Download Product Drawings For This Group
Ultramas Plug-in Front Panels for UM 3...09
Model Number	Part Number	Model Number	Part Number	Height Inches/mm	Width Inches/mm	Weight lbs.	CAD
FP 30009	56030900	FPK 30009	56030910	2.22/ 56.3	5.87/149	.037
FP 30012	56031200	FPK 30012	56031210	2.81/ 71.5	5.87/149	.046
FP 30018	56031800	FPK 30018	56031810	4.01/102.0	5.87/149	.068
FP 30021	56032100	FPK 30021	56032110	4.61/117.2	5.87/149	.099
FP 30027	56032700	FPK 30027	56032710	5.81/147.7	5.87/149
FP 30030	56033000	FPK 30030	56033010	6.41/162.9	5.87/149	.110
FP 30036	56033600	FPK 30036	56033610	7.61/193.4	5.87/149	.130

FP=Anodized aluminum, 2.0mm thick FPK=ABS Plastic, 2.0mm thick, embossed on one side
Front panels must be chosen to match the selected extension sets. Please refer to selection table.

Download Product Drawings For This Group
Ultramas Extension Sets AB... For UM 3...09
Model Number	Part Number	Extension Height Inches/mm	Enclosure Depth Inches/mm	Weight lbs.	CAD
AB 02003	56020500	0.60/15.24	7.83/198.9	.209
AB 02009	56020000	1.80/45.72	7.83/198.9	.209
AB 02009 L	56020010	1.80/45.72	7.83/198.9	.194
AB 02603	56026500	0.60/15.24	10.19/258.9	.260
AB 02609	56026000	1.80/45.72	10.19/258.9	.260
AB 02609 L	56026010	1.80/45.72	10.19/258.9	.249

L = with molded-in air vents in lid and base
Extension Sets make it possible to extend the Ultramas enclosure between the half shells.
Including: Two extension units, assembly material

Note: Dimensions are external. Metric is the primary dimension. Inch conversions are for the user’s convenience and are for reference only.

We have attempted to present the information about our enclosures on this website in a straight-forward manner. We offer this information as accurate at the time of publication. Specifications are subject to change without notice. Rose+Bopla Enclosures is not responsible for inadvertent errors.