Ultramas_UM5...11

Ultramas, UM5..., without air vents

Ultramas UM 5...11

Download Product Drawings For This Group
Ultramas Enclosures, UM 5...11
Model Number	Part Number	Width Inches/mm	Height Inches/mm	Depth Inches/mm	Weight lbs.	CAD
UM 52011	55520000	8.83/224.2	2.85/72.4	7.83/198.9	1.312
UM 52011 L	55520020	8.83/224.2	2.85/72.4	7.83/198.9	1.239

L=with molded-in air vents in lid and base
The usable basic enclosure height of 56.7mm, in horizontal use, can be increased by using
extension sets AB.... Front panels must be chosen to match the selected enclosure width.
Including: Two half-shells, eight covers, four rubber feet, and four M3 screws.
Accessories shown on drawing page.
Membrane Keypad.

Ultramas, UM5..., with air vents

Download Product Drawings For This Group
UM 5... Selection Table For Front Panels and Extension Sets
Usable Enclosure Height	Number of Extension Sets	Front Panels To Be Used
Usable Enclosure Height	AB 02009 (L)	Front Panels To Be Used
56.7 mm	-	FP(K) 50011
102.4 mm	2	FP(K) 50020
148.1 mm	2	FP(K) 50029

Ultramas Accessories

Download Product Drawings For This Group
Ultramas Plug-in Front Panels for UM 5...
Model Number	Part Number	Model Number	Part Number	Height Inches/mm	Width Inches/mm	Weight lbs.	CAD
FP 50011	56051100	FPK 50011	56051110	8.49/215.6	2.61/66.4	.066
FP 50020	56052000	FPK 50020	56052010	8.49/215.6	4.42/112.2	.110
FP 50029	56052900	FPK 50029	56052910	8.49/215.6	6.22/157.9	.152

FP=Anodized aluminum, 2.0mm thick FPK=ABS Plastic, 2.0mm thick, embossed on one side
Front panels must be chosen to match the selected extension sets. Please refer to selection table.
Membrane Keypad.

Download Product Drawings For This Group
Ultramas Extension Sets AB... For UM 5...
Model Number	Part Number	Extension Height Inches/mm	Enclosure Depth Inches/mm	Weight lbs.	CAD
AB 02009	56020000	1.80/45.72	7.83/198.9	.209
AB 02009 L	56020010	1.80/45.72	7.83/198.9	.194

L = with molded-in air vents in lid and base
Extension Sets make it possible to extend the Ultramas enclosure between the half shells.
Including: Two extension units, assembly material
Membrane Keypad.

Note: Dimensions are external. Metric is the primary dimension. Inch conversions are for the user’s convenience and are for reference only.

We have attempted to present the information about our enclosures on this website in a straight-forward manner. We offer this information as accurate at the time of publication. Specifications are subject to change without notice. Rose+Bopla Enclosures is not responsible for inadvertent errors.