Ultramas_UM6...09

Ultramas, UM6...09, without air vents

Ultramas UM 6...09

Download Product Drawings For This Group
Ultramas Enclosures, UM 6...09
Model Number	Part Number	Width Inches/mm	Height Inches/mm	Depth Inches/mm	Weight lbs.	CAD
UM 62009	55620000	11.45/290.9	2.45/62.2	7.83/198.9	1.462
UM 62009 L	55620010	11.45/290.9	2.45/62.2	7.83/198.9	1.378
UM 62609	55626000	11.45/290.9	2.45/62.2	10.19/258.9	1.790
UM 62609 L	55626010	11.45/290.9	2.45/62.2	10.19/258.9	1.808

L=with molded-in air vents in lid and base
The usable basic enclosure height of 46.5mm, in horizontal use, can be increased by using
extension sets AB.... Front panels must be chosen to match the selected enclosure width.
Including: Two half-shells, eight covers, four rubber feet, and four M3 screws.
Accessories shown on drawing page.
Membrane Keypad.

Ultramas, UM6...09, with air vents

Download Product Drawings For This Group
UM 6...09 Selection Table For Front Panels and Extension Sets
Usable Enclosure Height	Number of Extension Sets		Front Panels To Be Used
Usable Enclosure Height	AS 02...03	AB 02...09(L)	Front Panels To Be Used
46.5 mm	-	-	FP(K) 60009
61.7 mm	1	-	FP(K) 60012
92.2 mm	-	1	FP(K)60018
107.5 mm	-	2	FP(K) 60027
153.2 mm	1	2	FP(K) 60030
183.7 mm	-	3	FP(K) 60036

Ultramas Accessories

Download Product Drawings For This Group
Ultramas Plug-in Front Panels for UM 6...09
Model Number	Part Number	Model Number	Part Number	Height Inches/mm	Width Inches/mm	Weight lbs.	CAD
FP 60009	56060900	FPK 60009	56060910	2.22/56.3	11.11/282.3	.075
FP 60012	59061200	FPK 60012	56061210	2.81/71.5	11.11/282.3	.093
FP 60018	56061800	FPK 60018	56061810	4.01/102.0	11.11/282.3	.135
FP 60021	56062100	FPK 60021	56062110	4.61/117.2	11.11/282.3	.148
FP 60027	56062700	FPK 60027	56062710	5.81/147.7	11.11/282.3	.201
FP 60030	56063000	FPK 60030	56063010	6.41/162.9	11.11/282.3	.207
FP 60036	56063600	FPK 60036	56063610	7.61/193.4	11.11/282.3	.262

FP=Anodized aluminum, 2.0mm thick FPK=ABS Plastic, 2.0mm thick, embossed on one side
Front panels must be chosen to match the selected extension sets. Please refer to selection table.
Membrane Keypad.

Download Product Drawings For This Group
Ultramas Extension Sets AB... For UM6...09
Model Number	Part Number	Extension Height Inches/mm	Enclosure Depth Inches/mm	Weight lbs.	CAD
AB 02003	56020500	0.60/15.24	7.83/198.9	.209
AB 02009	56020000	1.80/45.72	7.83/198.9	.209
AB 02009 L	56020010	1.80/45.72	7.83/198.9	.194
AB 02603	56026500	0.60/15.24	10.19/258.9	.260
AB 02609	56026000	1.80/45.72	10.19/258.9	.260
AB 02609 L	56026010	1.80/45.72	10.19/258.9	.249

L = with molded-in air vents in lid and base
Extension Sets make it possible to extend the Ultramas enclosure between the half shells.
Including: Two extension units, assembly material
Membrane Keypad.

Note: Dimensions are external. Metric is the primary dimension. Inch conversions are for the user’s convenience and are for reference only.

We have attempted to present the information about our enclosures on this website in a straight-forward manner. We offer this information as accurate at the time of publication. Specifications are subject to change without notice. Rose+Bopla Enclosures is not responsible for inadvertent errors.