|
| TECHNICAL
DATA: |
| • |
Color: Body, agate gray, similar to RAL 7038. Bezel, transport gray, similar to RAL 7043. Special colors available on request. |
| • |
Material: Enclosure body, die cast aluminum, AL Si 12. Bezel, die cast aluminum AL Si 12. Front panel, anodized sheet aluminum, 3mm thick. |
| • |
Gasket Material: Neoprene |
| • |
Protection Classifications:
IP 65 to EN 60529
NEMA 12 |
| • |
Temperature range: -40º F up to +194º F |
| • |
Impact Resistance: >7Nm, EN 50014 for enclosure body |
|
|
|
| 1 |
Handle
Attachment |
| 2 |
Clear
Cover |
| 3 |
Front
Panel |
| 4 |
Front
Panel Seal |
| 5 |
Front
Frame |
| 6 |
Frame
Seal |
| 7 |
Enclosure
Body |
|
|
|
Rose+Bopla’s small aluminum machine control enclosures are designed for retro-fitting older machines and mills for NC and CNC controls, as well as for new equipment control packages.
This rugged die cast aluminum housing will operate in harsh manufacturing applications where oil, cutting fluids, vibration and shock are normal, everyday conditions.
The rear section is a rugged die cast aluminum base. The front bezel is a die cast aluminum frame with a removable clear anodized aluminum face plate. The base, front bezel and front face plate are all gasketed with neoprene gaskets to seal out oil, water and cutting fluids.
The face plate is easily removed for machining, silkscreening, and engraving.
Two types of handles are offered for most models–2 separate handles, or a ¾ wrap-around handle that can be mounted vertically or horizontally.
A front bezel with a beveled frame, specially designed for membrane front panels, is available for most sizes. Clear transparent doors, with snap latch or key operated locking latch, are available for most sizes. This viewing door is a protective cover and is not NEMA rated. We strongly recommend the installation of internal hinges with each small machine control housing. These hinges are invisible when the unit is operational, but allow the front panel to swing to the side, or drop down like a tray when the front bezel is opened for service access.
This system is designed to be used with the Rose+Bopla
suspension arm systems 4949, 4951, 4961, and 4981. |
|
|
