|
| TECHNICAL
DATA: |
| • |
Color: Body, agate gray, similar to RAL 7038. 2-part front
frame, transport gray, similar to RAL 7043. Special colors
available on request. Handles, black. |
| • |
Material: Enclosure body and 2-part front frame die cast aluminum, AL Si 12 DIN 1725. Front panel, anodized sheet aluminum, 3mm thick. Plastic coated tubular steel handles |
| • |
Finish–powder-coat painted |
| • |
Gasket material: Neoprene |
| • |
Protection Classifications:
IP 65 to EN 60529 NEMA 12
|
| • |
Temperature range: -40º F up to +194º
F |
|
•
|
Impact Resistance: >7Nm,EN 50014
|
|
|
|
►
Top right: Handle attachment
Bottom right: two-part front panel lid
Bottom Left: 1300 Machine Control Enclosure with
membrane keypad |
 |
|
|
|
These small machine control enclosures with membrane keypad-ready lids were developed from the standard line of 1300 Machine Control Enclosures. They are built on the same base, but a special 2-part front panel lid has been designed for mounting front panels and membrane keypads and to facilitate the mounting of control and display elements.
When combined with a handling frame and Rose+Bopla Suspension Arm Systems, the 1300 Membrane Lid Versions offer all the benefits of a universal operating and control enclosure. These enclosures can be used as housings for: control devices in machine and plant engineering; electronic components in
measurement and control engineering; compact industrial PCs; display units; and security and surveillance devices.
Construction
• Enclosure body
• Two part front frame–the two parts of the frame are fitted on top of each other and
attached to the enclosure body with stainless steel Allen head screws.
• Front panel–attached and sealed between the two parts of the frame.
• Seal–tongue and groove system with Neoprene seal.
• Handles–Plastic coated tubular steel
• Internal Mounting–threaded mounting bosses in base for optional galvanized
sheet steel mounting plate in or TS 35 DIN rail.
• Enclosure Mounting–through screw channels outside the sealing lip for fixed wall
mounting, or to swivel on a Rose+Bopla suspension arm system. |
|
Download
Product Drawings For This Group
 |
|
Small
Machine Control Enclosures-1300 Series |
| Series |
Length
Inches/mm |
Width
Inches/mm |
Height
Inches/mm |
Weight
lbs. |
CAD |
| 1307 |
6.30/160 |
10.24/260 |
4.29/109 |
5.39 |
|
| 1308 |
6.60/160 |
14.17/360 |
4.29/109 |
6.82 |
|
| 1310 |
7.95/202 |
9.13/232 |
5.08/129 |
6.69 |
|
| 1311 |
7.95/202 |
9.13/232 |
7.79/198 |
9.83 |
|
| 1312 |
12.99/330 |
9.06/230 |
5.08/129 |
8.72 |
|
| 1313 |
12.99/330 |
9.06/230 |
7.83/199 |
12.20 |
|
| 1314 |
15.75/400 |
9.06/230 |
5.0/129 |
10.08 |
|
| 1315 |
15.75/400 |
9.06/230 |
9.57/243 |
15.91 |
|
| 1317 |
11.02/280 |
9.06/230 |
5.08/129 |
7.48 |
|
| 1320 |
15.90/404 |
12.32/313 |
5.08/129 |
13.20 |
|
| 1321 |
15.90/404 |
12.32/313 |
7.83/199 |
16.50 |
|
| 1325 |
15.87/403 |
12.28/312 |
6.26/159 |
14.74 |
|
|
Note: Dimensions are external. Metric is the primary dimension. Inch conversions are for the user’s convenience and are for reference only.
Accessories shown on drawing page.
Call Factory for Further Information
1300
Customer Ordering Guide
|
|
|
|
