| TECHNICAL
DATA: |
| |
Surface Finish: 240 grain polished finish |
| |
Material: Stainless Steel
304 (1.4301) or 316L (1.4404) as an option, 1.25mm thick. |
| |
Temperature Range: -4Ί F to +104Ί F |
| |
Gasket Material:
Silicone
EMC (on request) |
| |
Ingress Protection: Up to NEMA 4X,
IP 65 to EN 60529 |
| |
Impact Resistance: >7Nm, EN 50014 |
| |
Explosion Protection: A Ex e II T6
A Ex i II T6
|
| |
Approvals:
Empty enclosure: PTB 00 ATEX 1101U
Terminal enclosure: PTB 00 ATEX 1052
UL File #E203312
|
| |
RoHS |
|
The Rose Ex Stainless Steel cabinets are second to none in reliability and appearance. These enclosures house electrical and electronic applications in hazardous locations in medicine, food preparation, pharmaceutics, wood and pulp mills, chemical environments, the entire petrochemical industry and many others.
The material is a 304 (1.4301), with 316L (1.4404) as an option,18 gauge grade stainless which is one of the most corrosive resistant materials used in popular enclosures. The seams are welded, ground smooth and then the entire cabinet is polished to a 240 grit finish. The silicone seal on the cover rests on a 15mm high lip on the bottom that is bent to an outward 10° angle so that nothing will
accidentally enter the enclosure when the door is opened. This design aids in water run off so there will be no ice build up. There is no need for costly sloped roof accessories.
Off the shelf cabinets feature stainless steel hinges, a stainless steel locking system, foam-in silicone seal, equipment mounting rails inside, mounting holes on back, and external ground. EMC gasketing and custom sizes are available on request. These cabinets are certified to the ATEX guidelines and will work for increased and intrinsically safe design.
Rose will machine the enclosure and install ATEX certified conduit hubs and/or cable glands, feed through terminals, and other ATEX components to make sure your system is compliant and marketable worldwide.
|
|
