4951/61/81 Suspension Arm

BACK TO SUSPENSION INTRO

4951, 4961, 4981 Suspension
Arm System

TECHNICAL DATA:

•

Color: Dark gray, similar to RAL 7043. Tubing, zinc plated.

•

Material: Square connecting tubing, 5mm thick, steel, to DIN 2395.

•

Protection Classifications:
IP 65, EN 60529
NEMA 12

•

Assembly: Cut tubing to desired length. Slide components together. Tighten to required torque. Complete assembly
instructions are provided with components.

•

Torque Requirements: 30 Nm, 22 lbs. force

•

Maximum Weight:

	3.3ft.	4.9ft.	6.6ft.	8.1ft.	9.8ft.	lbf.
System 51	225	146	112			lbf.
System 61	281	180	140	112		lbf.
System 81	337	213	163	135	112	lbf.
lbs. = Pounds Force

Sample Contructions

Rose+Bopla’s Suspension Arm Systems, 4951, 4961, and 4981, are modular systems for use in industrial environments. Square steel tubes can be combined with cast aluminum or steel system components to form various structures.
     When combined with Rose+Bopla’s system components they offer a wide variety of methods for setting up machine control units: as a vertical stand, as a wall-mounted system, or as a surface-mounted system. With their variable diameters these systems offer good wiring options and load-carrying capacity.
     System components are offered in three sizes to meet varying weight load requirements. Component features include: stylish appearance, adjustable bearings to control swing forces, base unit bracket suitable for upside-down mounting, integral multi-position stop plates and easy tube installation with set screws.
     These Suspension Arm Systems become self-contained tube systems due to the integrated seals in places where the system elements are joined, thus providing consistent IP 65 ingress protection up to the control unit. Cables are protected when installed through the unrestricted passageway created by burr-free inner contours and flush joints between tube and system elements. Swing can be adjusted to on-site requirements using adjustable fittings in the rotary and swivel elements.

Download Product Drawings For This Group
4951/61/81 Suspension Arm
	Part Number	Position	Material	Weight lbs.	CAD
	49517000 49617000 49817000	Pivots 180º Variable Stop Settings	Cast Steel	13.89 20.06 28.66
	WALL BRACKET
	49516600 49616600 49816600	Pivots 310º Variable Stop Settings	Cast Steel	30.86 40.12 51.37
	BASE UNIT BRAKCET
	49516700 49616700 49816700	Pivots 180º Variable Stop Settings	Cast Steel	13.67 19.62 28.00
	INTERMEDIATE JOINT
	49518000 49618000 49818000	Fixed	Cast Steel	9.92 12.79 17.64
	ELBOW
	49517400 49617400 49817400	Fixed	Cast Steel	6.61 8.60 13.23
	FOOT
	10094156 45 (51) 10094157 45 (61) 10094159 45 (81)	10 Foot Sections	Zinc Plated Steel	44.00 47.00 71.00
	SUPPORTING TUBE
	49517700 49617700 49817700	Pivots 325º Variable Stop Settings	Cast Aluminum	4.63 6.17 10.80
	FLANGE COUPLING
	49517500 49617500 49817500	Pivots 300º	Cast Aluminum	4.85 7.05 10.80
	ELBOW COUPLING
	49517800 49617800 49817800	Pivots 325º Variable Settings	Cast Aluminum	4.85 7.95 12.35
	FLANGE ELBOW COUPLING
	49517900 49617900 49817900	Fixed Variable Stop Settings	Cast Steel	11.02 13.23 14.33
	ADAPTER ANGLE COUPLING (for vertical wiring exit)
	49516200 49616200 49816200	Pivots 300º (adjustable angle)	Cast Aluminum Steel	3.97 4.85 6.17
	ADJUSTABLE ANGLE COUPLING
	49517600 49617600 49817600	Fixed	Cast Aluminum	1.76 2.20 3.75
	30º FIXED ANGLE ADAPTER FOR FLANGE COUPLING
	49518010 49618010 49818010	Fixed	Cast Aluminum	0.66 0.88 1.32
	SIGNAL LIGHT ADAPTER
	49517300 49617300 49817300	Pivots 300º (adjustable angle)	Cast Aluminum	3.97 5.29 7.49
	COUPLING

NOTE: Tubing can be cut to specific lengths. Maximum length for UPS shipment 9 feet (108")