|
| THE FOLLOWING STANDARDS
WILL BE APPLIED ONLY WHEN SPECIFIED. |
FEDERAL
SUPPLY
CODES |
Rose
Federal Supply Code
Rose Foreign Country Supply Code
Cage Code |
#FSCM-4Y520
#FSCM-C024
1L9R7 |
|
QUALITY
PROCEDURES |
ISO
9001:2000 |
|
CALIBRATION
SYSTEM
REQUIREMENTS |
ISO
9001:2000 |
ASSEMBLY
&
PACKAGING |
Mil
Spec
Special requests only |
#STD-130 |
|
| ALUMINUM |
Mil
Spec
ASTM
For Europe: |
ASTM-B85
#B-8560: S 12A
DIN 230 Alloy |
|
STAINLESS
STEEL
LID SCREWS |
Hardness
Cross: 70
Torque: M4 = 18-26 inch lbs. |
M6 = 26 - 35 inch lbs. |
|
|
Torque specs are included for reference only. Rose+Bopla does not recommend using a torque wrench on enclosures
(tighten until snug). |
MACHINED
SURFACES |
When
specified, Rose+Bopal can:
(A) Machine Surfaces to 125 micro inches or
better
(B) Deburr / Break All Sharp Edges
(C) Remove All Burrs |
|
Helicoils
Mil Spec |
#NASM-21209
Helicoil Insert Method |
|
|
Masking
Surfaces Prior to Painting
Rose+Bopla will mask all threaded surfaces
and connector mating surfaces prior to primer
and paint application. |
|
| Chemical
Surface Treatments |
| Gold
Irridite: |
Mil
Spec |
#C-5541-Class
1A |
| Clear
Irridite: |
Mil
Spec |
#C-5541-Class
3 |
|
|
NOTE: Gold irriditing to Mil Spec C-5541-Class 1A offers superior protection, but creates a less conductive surface for
grounding or shielding. Clear irriditing to Mil Spec C-5541-Class 3 offers less protection from corrosion, but leaves a
conductive surface which is recommended for optimum EMI shielding. All machined surfaces are irridited after machining. |
|
| Anodizing |
| Mil
Spec |
#
A 8625: Black Anodize Class 2 Type 2,
Nickel Acetate sealcoat test. |
| Federal
Standard |
#595A:
Color 37038 |
|
|
NOTE: All machined surfaces can be anodized after machining. |
|
|
| Rose+Bopla
normally does not paint any inside surfaces on
Military boxes, but leaves them gold irridited
bare aluminum (unpainted) in accordance with
normal requirements. |
|
|
Rose+Bopla
will evaluate coating requirements on a
per contract basis. Our capabilities
include both wet spray and powder
coating. |
|
|
| Silk
Screen Ink |
| Mil Spec |
#A-56032 |
Epoxy
White Ink |
| Mil Spec |
#A-56032 |
Epoxy Ink
Black |
|
|
| Engraving |
|
|
Per
customer's specifications |
|
|
|
We have attempted to present
the information about our enclosures on this website in a
straight-forward manner. We offer this information as
accurate at the time of publication. Specifications are
subject to change without notice. Rose+Bopla Enclosures is
not responsible for inadvertent errors. |
|
©2008
Phoenix Mecano Inc., 7330 Executive Way, Frederick, MD
21704, 301-696-9800,
rbinfo@pm-usa.com |
|
|
