| TECHNICAL
DATA: |
| • |
Base Color: Light Gray similar to RAL 7035 Base with a high- gloss finish |
| • |
Material: Injection molded Polycarbonate. Base is solid color. Lid is clear Lexan. See polycarbonate specification sheets in the Technical Information Chapter. |
| • |
Protection Classifications:
NEMA Types–up to Nema 4X.
IP 66, EN 60529 |
| • |
Gasket Temperature Range:
Neoprene Gasket –40ºF to +212ºF
Silicone Gasket –76ºF to +266ºF
RFI Gasket –40ºF to +392ºF |
| • |
Captive Lid Screws |
| • |
Surface Resistance:
>1015 Ohm / VDE 0303 |
| • |
Disruptive Strength: >30 KV / mm / VDE 0303 |
| • |
Toxicity: Halogen Free |
| • |
Approvals: UL Listed File #E206630, UL 50, UL 508
CSA Approved
Flammability: UL 94 V2
Special Material:
UL Listed File #E206630, UL 50, UL 508
CSA Approved
Flammability: UL 94 V5A |
| • |
Options: (Minimum order may apply)
Special colors
RFI Protection |
| |
|
|
Special Material: Special order. See above for
approvals. |
| |
|
 |
| |
|
 |
|
|
|
|
|
|
|
|
|
Rose+Bopla’s Polycarbonate Watertight 33 enclosures with clear lids offer design engineers an excellent, cost-effective, instrumentation box. The lid is made of clear polycarbonate
which makes it ideal for viewing meters or counters that must be protected from water and dust. Polycarbonate clear lid watertight enclosures are often used as data loggers, digital odometer instruments and process control monitors. Polycarbonate offers high impact resistance and excellent chemical resistance.
The Polycarbonate Watertight 33 includes a clear polycarbonate lid, a solid color polycarbonate base, captive stainless steel lid screws, molded-in lid screw inserts in the base, and a neoprene gasket. Metric press-in brass inserts for internal mounting bosses are also available. |
Note: Dimensions are external. Metric is the primary dimension. Inch conversions and weights are for the user’s convenience and are for reference only.
* “30” suffix indicates US made. Accessories shown on drawing page. |
| |
| |
|
